Kenmore Kenmore One-Speed Automatic Wa Washer Manual

The Kenmore One-Speed Automatic Washer is designed for efficient washing with a variety of settings to accommodate different fabric types. This manual provides essential information on features, installation, operation, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include a one-speed wash cycle, adjustable water levels, and a durable stainless steel drum for long-lasting performance.

Feature	Description
One-Speed Wash Cycle	Standard wash cycle for all fabric types
Adjustable Water Levels	Customize water usage based on load size
Stainless Steel Drum	Resistant to rust and chipping
Easy-to-Use Controls	Simple interface for selecting wash settings
Energy Efficient	Designed to save water and electricity

Installation

Carefully unpack the washer and inspect for any damage. Ensure the installation area is level and stable.

Connect the water supply hoses to the washer and the water source.
Plug the washer into a grounded electrical outlet.
Ensure the drain hose is properly positioned to prevent leaks.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select the desired wash cycle based on fabric type.
Adjust water level settings according to load size.
Press start to begin the wash cycle.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore One-Speed Automatic Washer.
Capacity: 3.5 cubic feet.
Power Supply: 120V, 60Hz.
Water Usage: Adjustable based on load size.
Dimensions: 27 inches wide, 42 inches high, 28 inches deep.
Weight: 150 lbs.

Controls and Settings

The washer features a user-friendly control panel with options for selecting wash cycles, water levels, and additional settings.

Control Panel: Start/Stop button, cycle selector, water level adjustment, and indicator lights.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the hot and cold water hoses to the corresponding inlets on the washer.
Connect the other end of the hoses to the water supply valves.
Turn on the water supply and check for leaks.

Tip: Use Teflon tape on hose threads for a secure fit.

Operating the Washer

To operate the washer, select the desired cycle and press the start button.

Load clothes into the drum without overloading.
Add detergent as per instructions.
Press start to begin the wash cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity of the washer.

Clean the lint filter after every use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and valves open.
Clothes not clean	Overloading	Reduce load size and use appropriate detergent.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.

Service: For further assistance, contact Kenmore support at 1-800-4-KENMORE.