Kenmore HE2PLUS 4753 Washer Manual

The Kenmore HE2PLUS 4753 is a high-efficiency front-load washer designed to provide exceptional cleaning performance while conserving water and energy. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry comes out clean and fresh. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, large capacity drum, multiple wash cycles, energy-efficient operation, and user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Includes Normal, Heavy Duty, Delicate, and more
Energy Efficiency	Designed to use less water and energy
Smart Dispense	Automatically dispenses detergent based on load size
Delay Start	Allows you to set a wash cycle to start later
Child Lock	Prevents accidental changes to settings

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust the feet to ensure stability.
Plug into AC power: Ensure proper voltage and grounding.
Run a test cycle: Check for leaks and proper operation.

WARNING! Ensure all connections are secure to avoid leaks. Follow local codes for installation.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select language: Choose your preferred language on the display.
Set water hardness: Adjust settings based on your water quality.
Run a calibration cycle: Follow instructions to ensure proper operation.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Kenmore HE2PLUS 4753.
Type: Front-load washer.
Capacity: 4.5 cubic feet.
Energy Star Rated: Yes.
Dimensions: 27" W x 34" H x 30" D.
Weight: 200 lbs.
Power Supply: 120V, 60Hz.
Water Consumption: 15 gallons per load.

Controls and Settings

Access settings via the digital display. Controls include Start/Pause, Cycle Selector, and Temperature settings.

Cycle Options: Normal, Heavy Duty, Delicate, Quick Wash, and Rinse & Spin.

Adjust settings for water temperature, spin speed, and soil level as needed.

Connecting Water Supply

Ensure proper connection of hot and cold water supply hoses.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for leaks after connecting.

Tip: Use new hoses for best results.

Operating the Washer

Follow these steps to operate the washer:

Load laundry: Do not overload the drum.
Add detergent: Use the recommended amount for your load size.
Select cycle: Choose the appropriate wash cycle.
Start the washer: Press the Start button to begin.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to prevent odors.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
Water not filling	Hoses kinked	Inspect hoses for kinks or clogs.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Door won't unlock	Cycle not complete	Wait for cycle to finish; check for error codes.
Odor in washer	Residual moisture	Run a cleaning cycle; leave door open to dry.

Reset: Unplug for 5 minutes to reset control board.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.