Kenmore Elite Oasis HT 110-2808 Series Washer Manual

The Kenmore Elite Oasis HT 110-2808 is a high-efficiency top-load washer designed to provide superior cleaning performance while being gentle on your clothes. It features advanced wash technology, multiple wash cycles, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: High-efficiency wash system, multiple wash cycles, large capacity drum, energy-saving options, and user-friendly controls.

Feature	Description
High-efficiency wash system	Uses less water and energy while providing a thorough clean.
Multiple wash cycles	Customizable settings for different fabric types and soil levels.
Large capacity drum	Accommodates large loads, reducing the number of washes needed.
Energy-saving options	Designed to minimize water and energy consumption.
User-friendly controls	Easy-to-read display and intuitive buttons for seamless operation.

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to the hot and cold water valves.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is properly grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to set preferences.

Select wash cycle: Choose the appropriate cycle for your load.
Adjust settings: Modify temperature, spin speed, and soil level as needed.
Load the washer: Do not overload to ensure optimal cleaning.

CAUTION! Ensure the washer is stable before use.

Specifications

Model: Kenmore Elite Oasis HT 110-2808.
Type: Top-load washer.
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes.
Wash Cycles: 12 different cycles.
Dimensions: 27.5" W x 44" H x 27" D.
Weight: 150 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the control panel. Key controls include cycle selector, temperature settings, and start/pause button.

Cycle Selector: Choose from various wash cycles based on fabric type.

Temperature Settings: Adjust for hot, warm, or cold washes.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding water valves.
Check for leaks after connection.

Tip: Use plumber's tape to ensure a tight seal.

Operating the Washer

Follow the steps to operate the washer effectively.

Load clothes: Do not exceed the recommended capacity.
Select the desired wash cycle and settings.
Press start to begin the wash cycle.
Wait for the cycle to complete; the washer will notify you.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter regularly.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Water supply issue	Ensure water valves are open.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Unusual noise	Foreign objects	Check drum for objects and remove.
Leaks	Hose connection	Check hoses for tightness and replace if damaged.

Service: For assistance, contact 1-800-4-MY-HOME or visit www.kenmore.com.