Kenmore Elite HE 3t 110-4997 Series Washer Manual

The Kenmore Elite HE 3t 110-4997 Series Washer is a high-efficiency front-load washing machine designed to provide superior cleaning performance while conserving water and energy. This washer features a variety of wash cycles, advanced technology for optimal fabric care, and a spacious drum to accommodate large loads. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, large capacity drum, multiple wash cycles, energy-efficient operation, and advanced cleaning technology.

FeatureDescription
Large Capacity DrumAccommodates large loads for fewer wash cycles
Multiple Wash CyclesCustomizable settings for various fabric types and soil levels
Energy EfficiencyDesigned to use less water and energy compared to traditional washers
Smart TechnologyAdjusts wash settings based on load size and fabric type
Quiet OperationLow noise levels during washing and spinning

Installation

Unpack and inspect the washer. Ensure you have the necessary tools and materials for installation.

  1. Position the washer: Place on a flat, stable surface near water and electrical connections.
  2. Connect water supply: Attach hoses to the hot and cold water valves.
  3. Level the washer: Adjust the feet to ensure the washer is level.
  4. Plug into electrical outlet: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

  1. Select language: Choose your preferred language for the display.
  2. Run calibration cycle: Follow instructions to calibrate the washer for optimal performance.
  3. Set preferences: Customize wash settings according to your needs.

CAUTION! Ensure the washer is properly installed before use.

Specifications

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and start the washer.

Control Panel: Power, Start/Pause, Cycle Selector, Temperature, Spin Speed, Soil Level.

Additional features include delay start, child lock, and end-of-cycle signal.

Connecting Water Supply

Ensure proper connections to the hot and cold water supply.

  1. Turn off water supply before connecting hoses.
  2. Match hoses to the correct water inlet (hot/cold).
  3. Check for leaks after connections are made.

Tip: Use new hoses for best results and to prevent leaks.

Operating the Washer

Follow these steps to operate the washer effectively.

  1. Load laundry: Do not overload the washer; leave space for items to move freely.
  2. Add detergent: Use the appropriate amount based on load size and soil level.
  3. Select cycle: Choose the desired wash cycle and settings.
  4. Start the washer: Press the Start button to begin the wash cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity of the washer.

  1. Clean the detergent dispenser regularly to prevent buildup.
  2. Check and clean the filter as needed.
  3. Run a cleaning cycle monthly to maintain freshness.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower supply issueCheck power connection and circuit breaker.
No water fillingHoses kinked or blockedInspect hoses for kinks and ensure water supply is on.
Excessive vibrationWasher not levelAdjust feet to level the washer.
Door won't unlockCycle not completeWait for the cycle to finish before opening the door.
Detergent residueIncorrect detergent useUse HE detergent and the correct amount.

Reset: Unplug for 5 minutes to reset the control board.

Kenmore Elite HE 3t 110-4997 Series Washer Manual © - All Rights Reserved 2026