Kenmore Elite 20937 Washer Manual

The Kenmore Elite 20937 is a high-efficiency front-load washer designed to provide superior cleaning performance while being energy efficient. It features advanced wash technology, multiple wash cycles, and a large capacity to handle various laundry needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, large capacity drum, multiple wash cycles, energy-efficient operation, and advanced cleaning technology.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load.
Multiple Wash Cycles	Customizable settings for different fabric types.
Energy Efficiency	Designed to save water and energy.
Smart Technology	Automatically adjusts wash settings for optimal performance.
Quiet Operation	Reduced noise levels during washing.

Installation

Unpack and inspect contents. Place washer on a level surface.

Connect water supply hoses: Attach to hot and cold water valves.
Connect drain hose: Ensure it is secured to the drain outlet.
Plug into electrical outlet: Ensure proper voltage and grounding.
Level the washer: Adjust feet for stability.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to configure settings.

Select language: Choose preferred language for the display.
Run a test cycle: Use the clean cycle to ensure proper operation.
Adjust settings: Customize water temperature and spin speed.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore Elite 20937.
Type: Front-load washer.
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes.
Wash Cycles: 12 different cycles.
Dimensions: 27" W x 34" H x 30" D.
Weight: 200 lbs.
Power Source: 120V, 60Hz.

Controls and Settings

Access controls via the front panel. Features include cycle selector, temperature settings, and start/pause button.

Display: LED indicators for cycle status and time remaining.

Settings: Customize wash cycles, spin speed, and soil level.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding water valves.
Check for leaks after connection.

Tip: Use Teflon tape on hose threads for a secure seal.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry: Do not overload the drum.
Add detergent: Use HE detergent for best results.
Select wash cycle: Choose appropriate cycle for fabric type.
Start the washer: Press the start button to begin.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
Water not filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Washer not level	Adjust feet to level the washer.
Door won't unlock	Cycle not complete	Wait for cycle to finish before opening.
Odor in washer	Residual moisture	Run a cleaning cycle to eliminate odors.

Service: For assistance, contact customer support at 1-800-4-KENMORE.