Kenmore ELITE 110-2506 Series Washer Manual

The Kenmore ELITE 110-2506 Series Washer is designed for efficiency and convenience, featuring advanced wash technology, multiple wash cycles, and energy-saving options. This manual provides essential information on safety, features, installation, operation, and troubleshooting for optimal use of your washer.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key features include a large capacity drum, multiple wash cycles, energy-efficient settings, and a user-friendly control panel.

Feature	Description
Large Capacity	Accommodates bulky items with ease.
Multiple Wash Cycles	Customizable settings for various fabric types.
Energy Efficiency	Designed to save water and energy.
Smart Controls	Easy-to-use interface for selecting wash options.
Quiet Operation	Minimized noise during wash cycles.

Installation

Carefully unpack the washer and inspect for any damage. Ensure the installation area is level and stable.

Connect the water supply hoses to the washer and the water source.
Plug the washer into a grounded outlet.
Ensure proper drainage setup to avoid leaks.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select the desired language and wash settings.
Run a test cycle to ensure proper operation.
Adjust settings as needed based on fabric types.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore ELITE 110-2506.
Capacity: 4.5 cu. ft.
Wash Cycles: 12 different cycles available.
Energy Star Rated: Yes.
Dimensions: 27" W x 30" D x 43" H.
Weight: 150 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and monitor progress.

Control Features: Start/Stop, Cycle Selector, Temperature Control, Spin Speed Adjustment.

Connecting Water Supply

Ensure proper connection to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Match hoses to the corresponding inlet valves.
Check for leaks after turning the water supply back on.

Tip: Use new hoses for best results.

Operating the Washer

Follow the instructions for loading clothes and selecting wash settings.

Load clothes evenly in the drum.
Select the appropriate wash cycle and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure optimal performance.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check hoses for wear and replace as necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unbalanced load	Redistribute clothes evenly in the drum.
Water leaking	Loose connections	Check and tighten all hose connections.

Reset: Unplug for 5 minutes to reset the control board.