Kenmore 970L4814 Series Washer Manual

The Kenmore 970L4814 Series Washer is designed for efficient and effective laundry care. This top-loading washing machine features multiple wash cycles, adjustable water levels, and a variety of settings to accommodate different fabric types. With a capacity of 4.8 cubic feet, it allows for larger loads, saving time and energy. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, energy-efficient operation, and user-friendly controls.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Energy Efficient	Designed to save water and electricity
Delay Start	Set a timer for when to start washing
Self-Cleaning Cycle	Maintains the cleanliness of the drum

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses: Attach to hot and cold water valves.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Check for leaks before use.

WARNING! Ensure all connections are secure to avoid water damage.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the control dial to choose your preferred cycle.
Set water temperature: Choose between hot, warm, or cold.
Adjust spin speed: Select based on fabric type.
Load laundry: Do not overload the washer for optimal performance.

CAUTION! Ensure the washer is level to prevent excessive vibrations.

Specifications

Capacity: 4.8 cubic feet.
Wash Cycles: 12 different cycles.
Water Efficiency: Energy Star certified.
Dimensions: 27 inches (W) x 42 inches (H) x 28 inches (D).
Weight: 150 lbs.
Power Source: 120V AC, 60Hz.
Operating Temperature: Standard room temperature.

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and spin speed settings.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Spin Speed Control.

Additional settings include Delay Start and Extra Rinse options.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for tightness to prevent leaks.

Tip: Use plumber's tape on threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry and close the lid.
Select the desired wash cycle and settings.
Press the Start button to begin washing.
Monitor the cycle progress via the indicator lights.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Run a self-cleaning cycle monthly.
Inspect hoses for wear and replace if necessary.
Wipe down the exterior with a damp cloth.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Door won't unlock	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.