Kenmore 970-C4808 Series Washer Manual

The Kenmore 970-C4808 Series Washer is a high-efficiency washing machine designed to provide superior cleaning performance while being energy efficient. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry is cleaned thoroughly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls, and quiet operation.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Various settings for different fabric types
Energy Efficiency	Designed to save water and electricity
User-Friendly Controls	Easy-to-use interface for selecting settings
Quiet Operation	Minimizes noise during washing

Installation

Unpack the washer and inspect for any damage. Place the washer on a level surface.

Connect water supply hoses to the washer and the water supply.
Ensure the drain hose is properly positioned.
Plug the washer into a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select your preferred language.
Set the water hardness level for optimal performance.
Run a test cycle to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 970-C4808
Capacity: 4.5 cu. ft.
Wash Cycles: 12 different cycles
Energy Star Rated: Yes
Dimensions: 27" W x 30" D x 39" H
Weight: 150 lbs.
Power Supply: 120V, 60Hz

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and start the washer.

Control Features: Start/Pause button, cycle selector dial, temperature settings, and spin speed options.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the hot and cold water supply hoses to the corresponding inlets.
Check for leaks after turning the water supply back on.

Tip: Use plumber's tape on hose threads to prevent leaks.

Operating the Washer

Follow the instructions to load laundry and select the appropriate wash cycle.

Load laundry into the drum without overloading.
Select the desired wash cycle and options.
Press the Start button to begin the wash cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Ensure hoses are not kinked or blocked.
Excessive vibration	Unlevel washer	Adjust the legs to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Reset: Unplug for 5 minutes to reset the control board.