Kenmore 796-4147 Series Washer Manual

The Kenmore 796-4147 Series Washer is a high-efficiency front-load washing machine designed to provide superior cleaning performance while being energy efficient. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry is cleaned thoroughly and gently. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, large capacity drum, multiple wash cycles, energy-efficient operation, and user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficient	Designed to save water and electricity
Smart Technology	Automatically adjusts water levels and wash times
Quiet Operation	Noise-reducing technology for a peaceful laundry experience

Installation

Unpack the washer and inspect for any damage. Ensure you have the necessary tools and materials for installation.

Connect the water supply hoses to the washer and the water supply valves.
Level the washer using adjustable feet.
Plug the washer into a grounded electrical outlet.
Run a test cycle to ensure proper installation.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set up.

Select your preferred language.
Set the water hardness level for optimal detergent performance.
Run a calibration cycle to ensure proper operation.

CAUTION! Ensure the washer is level before use to avoid excessive vibrations.

Specifications

Model: Kenmore 796-4147
Type: Front-load Washer
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes
Dimensions: 27" W x 30" D x 39" H
Weight: 200 lbs.
Power Supply: 120V, 60Hz
Water Consumption: 15 gallons per load

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and start the washer.

Control Panel: Power, Start/Pause, Cycle Selector, Temperature, Spin Speed, and Soil Level.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses securely to prevent leaks.
Check for leaks after turning the water supply back on.

Tip: Use new hoses for best results and to prevent leaks.

Operating the Washer

Load the washer with laundry, add detergent, and select the desired wash cycle.

Open the door and load laundry evenly.
Add the appropriate amount of detergent to the dispenser.
Select the wash cycle and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure proper cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to prevent odors.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
Water not filling	Hoses kinked	Check and straighten hoses.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for cycle to finish.
Odor in washer	Residual moisture	Run a cleaning cycle.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact Kenmore customer service.