Kenmore 796-3162 Series Washer Manual

The Kenmore 796-3162 Series Washer is a high-efficiency front-load washing machine designed to provide exceptional cleaning performance while being energy efficient. It features multiple wash cycles, advanced technology for stain removal, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, multiple wash cycles, energy-efficient operation, large capacity drum, and intuitive control panel.

Feature	Description
Multiple Wash Cycles	Variety of cycles for different fabric types and soil levels.
Energy Efficiency	Designed to use less water and energy compared to traditional washers.
Large Capacity	Can handle large loads, reducing the number of washes needed.
Smart Technology	Advanced sensors for optimal wash performance.
Quiet Operation	Designed to minimize noise during operation.

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable surface.

Connect water supply: Attach hoses to the hot and cold water valves.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is grounded.
Run a test cycle: Check for leaks and proper operation.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to set preferences.

Select language: Choose your preferred language on the display.
Set water hardness: Adjust settings based on your water quality.
Run calibration cycle: Follow instructions to calibrate the washer.

CAUTION! Ensure the washer is level to avoid excessive vibrations.

Specifications

Model: Kenmore 796-3162 Series.
Type: Front-load washer.
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes.
Dimensions: 27" W x 30" D x 39" H.
Weight: 200 lbs.
Power Source: 120V AC, 60Hz.
Operating Temperature: Standard room temperature.

Controls and Settings

Access the control panel for wash cycle selection, temperature settings, and additional options.

Control Panel: Start/Pause, Cycle Selector, Temperature Control, Spin Speed Control.

Settings: Customize wash cycles, adjust soil levels, and select additional options like pre-soak.

Connecting Water Supply

Ensure proper connection of water supply hoses to prevent leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for leaks after connection.

Tip: Use new hoses for best results and to prevent leaks.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry: Do not overload the washer.
Add detergent: Use the appropriate amount for your load size.
Select cycle: Choose the desired wash cycle based on fabric type.
Start the washer: Press the Start button to begin the cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to maintain freshness.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Door won't unlock	Cycle not complete	Wait for cycle to finish before opening.
Odor in washer	Residual moisture	Run a cleaning cycle to eliminate odors.

Service: For further assistance, contact Kenmore support.