Kenmore 796-3151 Washer Manual

The Kenmore 796-3151 is a high-efficiency front-load washer designed to provide exceptional cleaning performance while being gentle on fabrics. It features advanced wash technology, multiple wash cycles, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Front-load design, multiple wash cycles, energy-efficient, large capacity drum, and user-friendly controls.

Feature	Description
High Efficiency	Uses less water and energy compared to traditional washers.
Multiple Wash Cycles	Includes options for delicate, heavy-duty, and quick wash.
Large Capacity	Can handle large loads, saving time and energy.
Smart Controls	Easy-to-use interface with digital display.
Delay Start	Allows you to set a wash cycle to start later.

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable, level surface.

Connect water supply hoses to the washer and the water supply.
Ensure drain hose is properly positioned to prevent leaks.
Plug into a grounded electrical outlet.
Run a test cycle to ensure proper installation.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts for initial setup.

Select language preference on the display.
Set water hardness level for optimal performance.
Run a calibration cycle to ensure proper functioning.

CAUTION! Ensure the washer is level to prevent vibrations during operation.

Specifications

Model: Kenmore 796-3151.
Type: Front-load washer.
Capacity: 4.5 cu. ft.
Energy Efficiency: ENERGY STAR certified.
Dimensions: 27" W x 38" H x 30" D.
Weight: 200 lbs.
Power Supply: 120V, 60Hz.
Water Consumption: 13 gallons per load.

Controls and Settings

Access settings via the digital display. Control options include wash cycle selection, temperature settings, and spin speed adjustments.

Control Panel: Start/Pause, Cycle Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure proper connection of water supply hoses to prevent leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for leaks after connecting.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry into the drum, ensuring not to overload.
Add detergent to the designated compartment.
Select the desired wash cycle and settings.
Press Start to begin the wash cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a maintenance cycle monthly.

Regulatory Information

This washer complies with all applicable safety and performance standards. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
Water not filling	Hose kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for cycle to finish or press Pause.
Odor in drum	Residual moisture	Leave door open after use to dry.

Reset: Unplug for 5 minutes to reset the control board.

Service: 1-800-4-KENMORE; www.kenmore.com