Kenmore 796-31412310 Washer Manual

The Kenmore 796-31412310 is a high-efficiency front-load washer designed to provide exceptional cleaning performance while being energy efficient. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry is cleaned thoroughly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, multiple wash cycles, energy-efficient operation, large capacity drum, and user-friendly controls.

Feature	Description
Multiple wash cycles	Variety of settings for different fabric types and soil levels
Energy Star certified	Designed to save energy and water
Large capacity drum	Accommodates large loads for fewer washes
Delay start option	Allows you to schedule washes at your convenience
Child lock feature	Prevents accidental operation by children

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable, level surface.

Connect water supply hoses to the washer and the water supply.
Ensure drain hose is properly positioned in the drain or sink.
Plug the washer into a grounded electrical outlet.
Level the washer using adjustable feet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to set preferences.

Select language and region settings.
Run a test cycle to ensure proper operation.
Adjust settings for water temperature and spin speed as needed.

CAUTION! Ensure the washer is level to avoid excessive vibration.

Specifications

Model: Kenmore 796-31412310
Type: Front-load washer
Capacity: 4.5 cubic feet
Energy Efficiency: Energy Star certified
Dimensions: 27" W x 30" D x 39" H
Weight: 200 lbs
Power Source: 120V, 60Hz
Operating Temperature: Standard room temperature

Controls and Settings

Access settings via the control panel. Key controls include: Power, Start/Pause, Cycle Selector, and Temperature settings.

Display: LED indicators for cycle status and time remaining.

Adjust settings for wash cycles, rinse options, and spin speed.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold inlets on the washer.
Check for leaks after connections are made.

Tip: Use new hoses for best results.

Operating the Washer

Follow these steps to operate your washer:

Load laundry into the drum without overloading.
Add detergent to the designated compartment.
Select the desired wash cycle and options.
Press Start to begin the wash cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the drain filter as needed.
Run a cleaning cycle periodically to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
Water not filling	Hoses kinked or blocked	Inspect hoses for kinks or blockages.
Excessive vibration	Washer not level	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.
Odor in washer	Residual moisture	Run a cleaning cycle with washer cleaner.

Service: For assistance, contact Kenmore customer service.