Kenmore 41744130000 Washer Manual

The Kenmore 41744130000 is a high-efficiency front-load washer designed to provide excellent cleaning performance while being energy efficient. This washer features multiple wash cycles, adjustable spin speeds, and a variety of settings to accommodate different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-load design, multiple wash cycles, energy-efficient operation, adjustable spin speeds, and user-friendly controls.

Feature	Description
Multiple wash cycles	Options for different fabric types and soil levels
Energy efficiency	Designed to use less water and energy
Adjustable spin speeds	Customize spin speed for different loads
Delay start option	Set the washer to start at a later time
Child lock	Prevents accidental changes to settings

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust feet to ensure the washer is level.
Plug into AC power: Ensure the outlet is properly grounded.
Run a test cycle: Check for leaks and proper operation.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select language: Choose preferred language for the display.
Set water hardness: Adjust settings based on local water quality.
Run a calibration cycle: Follow instructions to calibrate the washer.

CAUTION! Ensure stable surface; use two people for handling if necessary.

Specifications

Model: Kenmore 41744130000.
Type: Front-load washer.
Capacity: 3.5 cu. ft.
Energy Star Rated: Yes.
Dimensions: 27" W x 34" H x 30" D.
Weight: 150 lbs.
Power Supply: 120V AC, 60Hz.

Controls and Settings

Access controls via the front panel. Key buttons include START/PAUSE, CYCLE SELECT, and OPTIONS.

Display: Shows cycle time remaining, selected options, and error codes.

Settings: Adjust water temperature, spin speed, and soil level as needed.

Connecting Water Supply

Ensure proper connections to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Check for leaks after connecting hoses.
Ensure hoses are secured and not kinked.

Tip: Use new hoses for best results.

Operating the Washer

Follow these steps to operate the washer:

Load laundry: Do not overload the washer.
Add detergent: Use the appropriate amount for load size.
Select cycle: Choose the desired wash cycle and options.
Start the washer: Press START/PAUSE to begin.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent dispenser regularly.
Check and clean the filter as needed.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and power cord.
No water in washer	Hoses kinked or blocked	Check hoses for kinks and blockages.
Excessive vibration	Washer not level	Adjust feet to level the washer.
Door won't unlock	Cycle not complete	Wait for cycle to finish; check for error codes.

Reset: Unplug the washer for 5 minutes to reset.

Service: For assistance, contact 1-800-4-KENMORE.