Kenmore 3950123 Washer Manual

The Kenmore 3950123 is a high-efficiency washing machine designed to provide optimal cleaning performance while being gentle on fabrics. It features multiple wash cycles, adjustable water levels, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: High-efficiency motor, multiple wash cycles, adjustable spin speed, and energy-saving settings.

Feature	Description
High-efficiency motor	Provides powerful cleaning while using less water and energy
Multiple wash cycles	Options for different fabric types and soil levels
Adjustable spin speed	Customizable spin settings for delicate or heavy loads
Energy-saving settings	Reduces water and energy consumption
Delay start option	Allows you to schedule wash cycles at your convenience

Installation

Unpack the washer and inspect for any damage. Place it on a level surface near a water supply.

Connect the water supply hoses to the washer and the faucet.
Ensure the drain hose is properly positioned in the drain or sink.
Plug the washer into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select your preferred language.
Set the water hardness level for optimal detergent performance.
Run a test cycle to ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 3950123.
Capacity: 4.5 cubic feet.
Power Source: 120V AC, 60Hz.
Water Consumption: High-efficiency water usage.
Dimensions: 27 inches wide, 30 inches deep, 38 inches high.
Weight: 150 lbs.

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and start the washer.

Control Panel: Power, Start/Pause, Cycle Selector, Temperature Control, Spin Speed.

Use the display to monitor cycle progress and remaining time.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses securely to prevent leaks.
Check for any leaks after turning the water supply back on.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Load clothes into the drum, select the desired cycle, and press Start.

Sort laundry by color and fabric type.
Add detergent to the designated compartment.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure proper cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Run a cleaning cycle monthly to prevent odor buildup.
Inspect hoses for wear and replace as necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Unbalanced load	Redistribute load evenly in the drum.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Reset: Unplug for 5 minutes to reset the control board.