Kenmore 2804 Series Washer Manual

The Kenmore 2804 Series Washer is designed for efficient and effective laundry care. This washer features multiple wash cycles, adjustable water levels, and energy-saving options. It is equipped with a durable drum, quiet operation, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Multiple wash cycles, adjustable water levels, energy-efficient design, user-friendly control panel.

Feature	Description
Multiple Wash Cycles	Variety of settings for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Energy Saving Mode	Reduces energy consumption during operation
Durable Drum	Designed for long-lasting performance
Quiet Operation	Minimizes noise during washing

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Level the washer: Adjust feet to ensure stability.
Plug into AC power: Ensure proper voltage is used.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the control panel to choose desired settings.
Set water temperature: Choose between hot, warm, or cold.
Load laundry: Do not overload the washer for optimal performance.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Kenmore 2804 Series.
Capacity: 4.5 cu. ft.
Wash Cycles: 12 different cycles available.
Energy Efficiency: Energy Star certified.
Dimensions: 27" W x 30" D x 44" H.
Weight: 150 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the control panel. Key buttons include START/PAUSE, CYCLE SELECT, and WATER TEMP.

Display: LED indicators for cycle status and error messages.

Connecting Water Supply

Ensure proper connection to hot and cold water sources.

Turn off water supply before connecting hoses.
Match hoses to corresponding faucets.
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer:

Load laundry into the drum.
Select desired wash cycle and options.
Press START to begin the wash.
Monitor the cycle via the display.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Service: For assistance, contact Kenmore support at 1-800-469-4663.