Kenmore 2803 Washer Manual

The Kenmore 2803 Washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, user-friendly control panel.

Feature	Description
Wash Cycles	Multiple settings for different fabric types
Water Level Adjustment	Customize water usage based on load size
Control Panel	Easy-to-use interface for selecting settings
Energy Efficient	Designed to save water and electricity
Safety Lock	Prevents accidental opening during operation

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses: Attach hoses to hot and cold water valves.
Ensure drainage: Position drain hose properly to avoid leaks.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your laundry.
Adjust water level: Set according to load size.
Start the wash: Press the start button to begin.

CAUTION! Ensure the lid is closed before starting the wash.

Specifications

Model: Kenmore 2803
Type: Top-loading washer
Capacity: 3.5 cubic feet
Power Source: 120V AC
Dimensions: 27" W x 42" H x 27" D
Weight: 150 lbs
Wash Cycles: 12 different settings
Water Efficiency: Energy Star certified

Controls and Settings

Access settings via the control panel. Key controls include: Start/Stop, Cycle Selector, Water Level, and Delay Start.

Cycle Selector: Choose from various wash cycles based on fabric type.

Water Level: Adjust the water level according to load size.

Connecting Water Supply

Ensure proper connection of water supply hoses to avoid leaks.

Turn off water supply before connecting hoses.
Attach hoses to the washer and water valves securely.
Check for leaks after turning on the water supply.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Follow these steps to operate the washer effectively:

Load laundry into the drum, ensuring not to overload.
Select the desired wash cycle and water level.
Press the start button to begin the wash.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Water leaking	Loose hoses	Check and tighten all hose connections.
Cycle not completing	Power interruption	Check for power outages or tripped breakers.

Reset: Unplug for 5 minutes to reset the washer.