Kenmore 23652 Washer Manual

The Kenmore 23652 Washer is a high-efficiency top-load washing machine designed to provide superior cleaning performance while conserving water and energy. It features multiple wash cycles, a large capacity drum, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly control panel.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Customizable settings for various fabric types
Energy Efficiency	Designed to save water and electricity
User-Friendly Controls	Easy-to-read display and intuitive buttons
Delay Start	Allows you to set a wash cycle to start later
Self-Cleaning Cycle	Keeps the drum fresh and clean

Installation

Unpack the washer and inspect for any damage. Place it on a level surface.

Connect the water supply hoses to the washer and the faucet.
Ensure the drain hose is properly positioned.
Plug the washer into a grounded outlet.
Level the washer using adjustable legs.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts.

Select your preferred language on the display.
Run a test cycle without laundry to ensure proper operation.
Adjust settings according to your laundry preferences.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 23652
Type: Top-load washer
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes
Wash Cycles: 12
Spin Speed: Up to 1200 RPM
Dimensions: 27" W x 42" H x 28" D
Weight: 150 lbs

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and start the washer.

Control Features: Start/Pause button, cycle selector, temperature settings, spin speed options.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the hot and cold water hoses to the corresponding inlets on the washer.
Securely fasten the hoses to prevent leaks.
Turn on the water supply and check for leaks.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Load laundry into the drum, select the desired cycle, and press start.

Open the lid and load clothes evenly.
Select the wash cycle and options.
Press the Start button to begin the wash.
Wait for the cycle to complete; the washer will notify you when done.

WARNING! Do not overload the washer to ensure proper cleaning.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Run a self-clean cycle monthly.
Inspect hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Excessive vibration	Unlevel washer	Adjust legs to level the washer.
Water leaking	Loose hoses	Tighten hose connections.

Service: For assistance, contact customer support at 1-800-123-4567.