Kenmore 22862 Washer Manual

The Kenmore 22862 is a high-efficiency top-load washer designed to provide excellent cleaning performance while being energy efficient. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry comes out clean and fresh. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Wash Cycles	Multiple settings for different fabric types and soil levels
Energy Efficiency	Designed to save water and energy while providing optimal cleaning
Large Capacity	Can handle larger loads, reducing the number of washes needed
Smart Controls	User-friendly interface for easy operation
Quiet Operation	Designed to minimize noise during operation

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your load.
Set water temperature: Adjust based on fabric type.
Load clothes: Do not overload the drum for optimal cleaning.

CAUTION! Ensure the washer is level to avoid excessive vibration.

Specifications

Model: Kenmore 22862
Type: Top-load washer
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes
Wash Cycles: 12 different cycles
Dimensions: 27.5" W x 44" H x 27" D
Weight: 150 lbs
Power Source: 120V AC

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause button.

Control Panel: Easy-to-read display with intuitive buttons for quick access to settings.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to correct faucets (hot and cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to ensure a tight seal.

Operating the Washer

Follow these steps to operate the washer effectively.

Load clothes into the drum.
Select the desired wash cycle.
Press the start button to begin washing.
Monitor the cycle progress on the display.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter regularly.
Run a cleaning cycle monthly to prevent buildup.
Check hoses for wear and replace if necessary.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Door won't unlock	Cycle not complete	Wait for cycle to finish before opening.

Service: For further assistance, contact customer support.