Kenmore 22852 Washer Manual

The Kenmore 22852 is a high-efficiency top-load washer designed to provide exceptional cleaning performance while being gentle on your clothes. It features multiple wash cycles, a large capacity drum, and advanced technology to optimize water and energy usage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficiency	Designed to save water and energy
User-Friendly Controls	Easy-to-read display and intuitive buttons
Delay Start	Allows you to schedule wash cycles
Self-Cleaning Cycle	Keeps the drum fresh and clean

Installation

Unpack and inspect contents. Ensure the washer is placed on a level surface.

Connect water supply hoses: Attach to hot and cold water faucets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to set preferences.

Select wash cycle: Choose based on fabric type.
Adjust water temperature: Set to hot, warm, or cold as needed.
Load laundry: Do not overload the drum.
Start the wash: Press the start button to begin.

CAUTION! Ensure the lid is closed before starting the wash.

Specifications

Model: Kenmore 22852
Capacity: 4.5 cubic feet
Wash Cycles: 12 different cycles
Energy Star Rated: Yes
Dimensions: 27.5" W x 44" H x 27" D
Weight: 150 lbs
Power Supply: 120V, 60Hz

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause options.

Control Panel: Cycle selector dial, temperature buttons, start/pause button, and display panel.

Connecting Water Supply

Ensure proper connection to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to corresponding faucets (hot to hot, cold to cold).
Check for leaks after connection.

Tip: Use plumber's tape on threads to prevent leaks.

Operating the Washer

Follow the instructions for selecting cycles and starting the wash.

Load laundry and close the lid.
Select desired wash cycle and options.
Press start to begin washing.
Monitor progress on the display panel.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Run a self-cleaning cycle monthly.
Inspect hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Unusual noise	Foreign object	Check drum for foreign objects.
Water leaking	Loose hose	Tighten connections and check hoses.

Reset: Unplug for 5 minutes to reset the system.

Service: For assistance, contact Kenmore support.