Kenmore 22842 Washer Manual

The Kenmore 22842 is a top-loading washing machine designed for efficiency and ease of use. It features multiple wash cycles, a large capacity drum, and advanced cleaning technology to ensure your laundry comes out fresh and clean. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates large loads of laundry
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficient	Designed to save water and electricity
User-Friendly Controls	Easy-to-read display and intuitive buttons
Delay Start	Allows you to schedule wash cycles
Self-Cleaning Cycle	Keeps the drum clean and odor-free

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses: Attach hoses to the hot and cold water faucets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your laundry.
Adjust settings: Set water temperature and spin speed as needed.
Load laundry: Do not overload the drum for optimal performance.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 22842
Type: Top-loading washer
Capacity: 4.2 cubic feet
Water Consumption: 15 gallons per load
Energy Star Rated: Yes
Dimensions: 27.5" W x 42" H x 27" D
Weight: 150 lbs
Power Source: 120V AC

Controls and Settings

Access settings via the control panel. Key controls include Start/Pause, Cycle Selector, and Temperature settings.

Cycle Selector: Choose from Normal, Delicate, Heavy Duty, and more.

Temperature: Adjust for hot, warm, or cold washes. Spin Speed: Select high or low based on fabric type.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water inlets.
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry into the drum.
Select the desired wash cycle and settings.
Press Start to begin the wash cycle.
Monitor the cycle progress via the display.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Run a self-cleaning cycle monthly.
Inspect hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Water leaking	Loose hoses	Tighten hose connections.

Reset: Unplug for 5 minutes to reset the control board.

Service: Contact Kenmore support for assistance.