Kenmore 20996 Washer Manual

The Kenmore 20996 is a high-efficiency top-load washer designed to provide superior cleaning performance while being gentle on fabrics. It features multiple wash cycles, an energy-efficient design, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly control panel.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficiency	Designed to save water and electricity
User-Friendly Control Panel	Easy to navigate settings and options
Delay Start	Allows you to set a wash cycle to start later
Self-Cleaning Cycle	Maintains the washer's cleanliness

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses: Attach hoses to hot and cold water inlets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into electrical outlet: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the control panel to choose your desired cycle.
Adjust settings: Set water temperature and spin speed as needed.
Load laundry: Do not overload the drum for optimal performance.

CAUTION! Ensure the washer is level to prevent vibrations.

Specifications

Model: Kenmore 20996
Type: Top-Load Washer
Capacity: 4.5 cu. ft.
Energy Star Rated: Yes
Wash Cycles: 12
Spin Speed: Up to 1200 RPM
Dimensions: 27" W x 44" H x 27" D
Weight: 150 lbs

Controls and Settings

Access settings via the control panel. Key controls include Start/Pause, Cycle Selector, and Temperature settings.

Cycle Selector: Choose from Normal, Delicate, Heavy Duty, and more.

Temperature: Adjust for cold, warm, or hot washes. Spin Speed: Select high or low based on fabric type.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding inlets (hot to hot, cold to cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry into the drum, ensuring even distribution.
Select the desired wash cycle and settings.
Press Start to begin the wash cycle.
Monitor the cycle through the control panel.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Run a self-cleaning cycle monthly.
Check hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water in drum	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Washer not level	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the control board.

Service: Contact Kenmore support at 1-800-4-KENMORE.