Kenmore 20947 Washer Manual

The Kenmore 20947 is a high-efficiency top-load washer designed to provide superior cleaning performance while being energy efficient. It features multiple wash cycles, a large capacity drum, and advanced technology to ensure your laundry is cleaned thoroughly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficiency	Designed to use less water and energy
User-Friendly Controls	Easy-to-read display and intuitive buttons
Delay Start	Allows you to schedule wash cycles at your convenience
Self-Cleaning Cycle	Keeps the drum fresh and clean

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the washer and faucet.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Check for leaks and ensure all connections are secure.

WARNING! Ensure the washer is level to avoid vibrations during operation.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select the desired wash cycle using the control panel.
Set the water temperature according to fabric type.
Add detergent to the designated compartment.
Start the wash cycle by pressing the START button.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 20947.
Type: Top-load washer.
Capacity: 4.5 cu. ft.
Energy Rating: Energy Star certified.
Wash Cycles: 12 different cycles available.
Dimensions: 27" W x 42" H x 28" D.
Weight: 150 lbs.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access wash settings via the control panel. Key buttons include START, PAUSE, and cycle selection.

Display: LED indicators for cycle status and time remaining.

Settings: Adjust water level, temperature, and spin speed as needed.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off the water supply before connecting hoses.
Match hoses to the correct hot and cold water inlets.
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow the instructions for optimal performance.

Load laundry evenly in the drum.
Add detergent and any fabric softener as needed.
Select the appropriate wash cycle and settings.
Press START to begin the wash cycle.

WARNING! Do not overload the washer to prevent damage.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter regularly.
Run a self-cleaning cycle monthly.
Inspect hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size and rewash.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact 1-800-4-KENMORE.