Kenmore 20946 Washer Manual

The Kenmore 20946 Washer is a high-efficiency top-load washing machine designed to provide superior cleaning performance while being gentle on fabrics. It features multiple wash cycles, a large capacity drum, and advanced technology to optimize water and energy usage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficiency	Designed to save water and electricity
Smart Controls	Easy-to-use interface with digital display
Delay Start	Allows you to schedule washes at your convenience

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust the feet to ensure stability.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select language: Choose your preferred language on the display.
Run a test cycle: Use an empty load to check functionality.
Adjust settings: Familiarize yourself with the control panel.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Kenmore 20946.
Type: Top-load washer.
Capacity: 4.5 cu. ft.
Power Source: 120V AC, 60Hz.
Water Usage: High-efficiency design.
Dimensions: 27" W x 42" H x 27" D.
Weight: 150 lbs.

Controls and Settings

Access settings via the digital control panel. Features include cycle selection, temperature settings, and spin speed adjustments.

Smart Features: Delay start, load sensing, and energy-saving modes.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off water supply before connecting hoses.
Match hoses to the correct inlet valves.
Check for leaks after connection.

Tip: Use adjustable wrenches to tighten connections securely.

Operating the Washer

Follow these steps to operate the washer:

Load laundry: Do not overload the drum.
Select wash cycle: Choose the appropriate cycle for your load.
Start the cycle: Press the start button to begin.
Monitor progress: The display will show the remaining time.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.

Reset: Unplug for 5 minutes and plug back in to reset.