Kenmore 20222 Washer Manual

The Kenmore 20222 Washer is a high-efficiency top-load washing machine designed to provide superior cleaning performance while being gentle on your clothes. It features multiple wash cycles, a large capacity drum, and energy-saving options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly controls.

Feature	Description
Large Capacity Drum	Accommodates more laundry in a single load
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficiency	Designed to save water and electricity
Delay Start	Allows you to schedule wash cycles at your convenience
Child Lock	Prevents accidental changes to settings

Installation

Unpack and inspect contents. Place washer on a level surface.

Connect water supply hoses to the washer and faucet.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Level the washer using adjustable legs.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select preferred language on the display.
Run a test cycle to ensure proper operation.
Adjust settings for water temperature and wash cycle.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 20222
Type: Top-load washer
Capacity: 4.5 cu. ft.
Power Source: 120V AC, 60Hz
Water Consumption: Low water usage per cycle
Dimensions: 27" W x 42" H x 28" D
Weight: 150 lbs

Controls and Settings

Access settings via the digital display. Controls include cycle selection, temperature adjustment, and start/pause functions.

Cycle Options: Normal, Delicate, Heavy Duty, Quick Wash.

Additional settings: Soil Level, Spin Speed, and Rinse Options.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot/cold inlets on the washer.
Check for leaks after turning on the water supply.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Load laundry into the drum, select cycle, and press start.

Load clothes evenly around the drum.
Select desired wash cycle and options.
Press START to begin the wash cycle.
Monitor progress on the display.

WARNING! Do not overload the washer; it may affect performance.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after every use.
Run a cleaning cycle monthly.
Check hoses for wear and replace if necessary.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Unusual noise	Load imbalance	Redistribute clothes evenly in the drum.
Water leaking	Loose hose connections	Check and tighten all hose connections.
Cycle not completing	Power interruption	Check for power outages or tripped breakers.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact Kenmore support at 1-800-4-KENMORE.