Kenmore 11028002010 Washer Manual

The Kenmore 11028002010 is a top-loading washing machine designed for efficient cleaning and ease of use. It features multiple wash cycles, adjustable water levels, and a durable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Multiple Wash Cycles	Different settings for various fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Durable Design	Built to withstand regular use and last for years
Large Capacity Drum	Accommodates larger loads for efficiency
Easy-to-Use Controls	Simple interface for selecting wash settings

Installation

Unpack the washer and inspect for any damage. Place it on a level surface near a water supply.

Connect the water supply hoses to the back of the washer.
Ensure the drain hose is properly positioned.
Plug the washer into a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the initial setup instructions.

Select the desired wash cycle based on your laundry needs.
Adjust water level settings if necessary.
Load laundry into the drum and close the lid.
Press the start button to begin washing.

CAUTION! Do not overload the washer to ensure proper cleaning.

Specifications

Model: Kenmore 11028002010
Type: Top-loading washer
Capacity: 3.5 cubic feet
Wash Cycles: 12 different cycles
Water Levels: Adjustable settings
Power Source: 120V AC
Dimensions: 27 inches (W) x 42 inches (H) x 27 inches (D)

Controls and Settings

Access the control panel to select wash cycles, water levels, and additional settings.

Control Panel: Start/Stop, Cycle Selector, Water Level Selector, and Delay Start options.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses to the corresponding hot and cold inlets.
Check for leaks after turning the water supply back on.

Tip: Use plumber's tape on hose threads to prevent leaks.

Operating the Washer

Follow the instructions for loading and operating the washer effectively.

Load clothes evenly in the drum.
Select the appropriate wash cycle and settings.
Press the start button to begin the wash.
Wait for the cycle to complete before unloading.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance of your washer.

Clean the lint filter regularly.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and power cord connections.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Excessive vibration	Unlevel surface	Adjust the washer feet to level it.
Water leaks	Loose connections	Tighten hose connections and check for damage.

Service: For assistance, contact Kenmore support at 1-800-4-KENMORE.