Kenmore 11026652502 Washer Manual

The Kenmore 11026652502 is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable spin speed, water level selection, and a large capacity drum.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Durable Construction	Built to withstand heavy use
Large Capacity Drum	Accommodates larger loads for efficiency
Easy-to-Use Controls	Simple interface for selecting wash settings

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the inlet valves.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Check for leaks before use.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts if available.

Set water temperature: Choose hot, warm, or cold based on fabric care.
Select wash cycle: Use the dial to choose the appropriate cycle.
Adjust spin speed: Set according to load type.
Start the wash: Press the start button to begin.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 11026652502
Type: Top-loading washer
Capacity: 3.5 cu. ft.
Wash Cycles: Normal, Delicate, Heavy Duty, and more
Water Levels: Adjustable based on load size
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access settings via the control panel. Key buttons include Start, Pause, and Cycle Selector.

Cycle Selector: Choose the desired wash cycle based on fabric type.

Water Temperature: Adjust for optimal cleaning based on load.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding inlet valves.
Check for leaks after connection.

Tip: Use plumber's tape on threads to ensure a tight seal.

Operating the Washer

Follow the steps for loading and starting the washer.

Load clothes evenly in the drum.
Add detergent as per instructions.
Select desired settings and press Start.
Monitor the cycle progress on the display.

WARNING! Do not overload the washer to avoid damage.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and power cord.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Incorrect cycle	Choose appropriate wash cycle for load.
Excessive vibration	Unbalanced load	Redistribute clothes evenly in the drum.
Water leaking	Loose hoses	Check and tighten all hose connections.

Reset: Unplug for 5 minutes to reset the control board.

Service: For assistance, contact 1-800-4-KENMORE.