Kenmore 11022622100 Washer Manual

The Kenmore 11022622100 is a top-loading washing machine designed for efficient cleaning and convenience. It features multiple wash cycles, adjustable water levels, and a durable construction. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Multiple wash cycles	Different settings for various fabric types and soil levels.
Adjustable water levels	Customize water usage based on load size.
Large capacity drum	Accommodates larger loads for fewer washes.
Durable construction	Built to withstand regular use and last for years.
Energy efficient	Designed to save water and energy.

Installation

Unpack the washer and inspect for any damage. Place the washer on a flat, stable surface.

Connect the water supply hoses to the back of the washer.
Ensure the drain hose is properly positioned in the drain or sink.
Plug the washer into a grounded electrical outlet.
Level the washer using the adjustable feet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the prompts on the display.

Select the desired wash cycle using the control panel.
Adjust water level according to load size.
Add detergent to the designated compartment.
Close the lid and press the start button.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 11022622100.
Type: Top-loading washer.
Capacity: 3.5 cubic feet.
Wash Cycles: Normal, Heavy Duty, Delicate, Quick Wash.
Water Efficiency: Adjustable water levels.
Power Source: 120V AC, 60Hz.
Dimensions: 27 inches (W) x 42 inches (H) x 27 inches (D).

Controls and Settings

Access the control panel to select wash cycles, water levels, and additional settings.

Buttons: Start, Pause, Cancel, Cycle Selector, Water Level Selector.

Indicators: Cycle progress, lid lock status, and error notifications.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off the water supply before connecting hoses.
Attach hoses to the corresponding hot and cold inlets on the washer.
Tighten connections to prevent leaks.

Tip: Check for leaks after connecting the hoses.

Operating the Washer

Follow the steps to operate the washer effectively.

Load clothes into the drum without overloading.
Select the appropriate wash cycle and water level.
Add detergent and any fabric softener if desired.
Press the start button to begin the wash cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance will ensure optimal performance.

Clean the lint filter after every use.
Wipe down the exterior with a damp cloth.
Run a cleaning cycle monthly to prevent odors.
Check hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Washer vibrating	Unlevel surface	Adjust feet to level the washer.
Odor in washer	Dirty drum	Run a cleaning cycle with washer cleaner.

Service: For assistance, contact Kenmore customer support.