Kenmore 11021252112 Washer Manual

The Kenmore 11021252112 is a top-loading washing machine designed for efficient cleaning and convenience. It features multiple wash cycles, adjustable water levels, and a durable construction. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Multiple wash cycles	Different settings for various fabric types and soil levels
Adjustable water levels	Customize water usage based on load size
Durable construction	Built to withstand regular use
Energy efficient	Designed to save water and electricity

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the dial to choose the desired cycle.
Set water temperature: Adjust based on fabric type.
Load laundry: Do not overload the washer.

CAUTION! Ensure the washer is level to avoid vibrations.

Specifications

Model: Kenmore 11021252112
Type: Top-loading washer
Wash Capacity: 3.5 cu. ft.
Water Usage: Adjustable based on load size
Power Source: 120V AC
Dimensions: 27" W x 42" H x 27" D
Weight: 150 lbs.

Controls and Settings

Access controls via the front panel. Settings include wash cycle selection, water temperature, and spin speed.

Indicator lights: Show status of the wash cycle and any errors.

Connecting Water Supply

Ensure proper connection to hot and cold water sources.

Turn off water supply before connecting hoses.
Match hoses to correct faucets (hot to hot, cold to cold).
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry and close the lid.
Select the desired wash cycle and options.
Press the start button to begin the wash.
Wait for the cycle to complete; the washer will alert you.

WARNING! Do not open the lid during operation.

Maintenance

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Care & Cleaning

Unplug before cleaning. Use a damp cloth to wipe the exterior.

CAUTION! Do not use abrasive cleaners or solvents.

Regulatory Information

This appliance complies with all applicable safety standards. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and power cord.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.

Reset: Unplug for 5 minutes to reset the control board.

Service: 1-800-4-KENMORE; www.kenmore.com