Kenmore 11020862990 and Washer Manual

The Kenmore 11020862990 is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, water temperature settings, and a large capacity drum to accommodate various laundry loads. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Wash Cycles	Multiple settings for different fabric types and soil levels
Water Temperature	Adjustable settings for hot, warm, and cold washes
Spin Speed	Variable spin speeds for efficient water extraction
Capacity	Large drum to handle bigger loads
Energy Efficiency	Designed to save water and energy

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the washer and water source.
Ensure drain hose is properly positioned to avoid leaks.
Plug into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select wash cycle based on load type.
Set water temperature and spin speed as needed.
Add detergent and load laundry into the drum.
Start the wash cycle.

CAUTION! Ensure the washer is level to avoid vibrations.

Specifications

Model: Kenmore 11020862990
Type: Top-loading washing machine
Capacity: 3.5 cu. ft.
Wash Cycles: 12 different cycles
Water Temperature: Hot, Warm, Cold
Spin Speed: Up to 800 RPM
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access controls via the front panel. Settings include wash cycle selection, water temperature adjustment, and spin speed control.

Indicator Lights: Show status of the wash cycle, including wash, rinse, and spin.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlets on the washer.
Check for leaks after connections are made.

Tip: Use plumber's tape on threads to prevent leaks.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry into the drum without overloading.
Add the appropriate amount of detergent.
Select the desired wash cycle and settings.
Press the start button to begin the wash cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter regularly.
Check hoses for wear and tear.
Run a cleaning cycle monthly.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all applicable safety standards and regulations. For support, visit www.kenmore.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water in drum	Water supply issue	Ensure water supply is turned on.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size and rewash.

Reset: Unplug for 5 minutes to reset the control board.

Service: 1-800-4-KENMORE; www.kenmore.com