Kenmore 110-4708-110-4709 Washer Manual

The Kenmore 110-4708 and 110-4709 are top-loading washing machines designed for efficient laundry care. These models feature various wash cycles, water temperature settings, and load size options to accommodate different fabric types and laundry needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a user-friendly control panel.

Feature	Description
Wash Cycles	Multiple settings for different fabric types
Water Temperature	Adjustable settings for hot, warm, and cold washes
Load Size Options	Adjustable settings for small, medium, and large loads
Spin Speed	Variable spin speed options for efficient drying
Delay Start	Option to delay the start of the wash cycle

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Connect drain: Ensure the drain hose is properly positioned.
Plug into AC power.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts if available.

Set water temperature: Choose desired temperature for the wash.
Select wash cycle: Choose the appropriate cycle for your laundry.
Adjust load size: Set the load size according to the amount of laundry.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model Numbers: 110-4708, 110-4709.
Type: Top-loading washer.
Capacity: 3.5 cu. ft.
Power Source: 120V AC, 60Hz.
Wash Cycles: Normal, Delicate, Heavy Duty, Quick Wash.
Dimensions: 27 inches wide, 42 inches high, 27 inches deep.
Weight: Approximately 150 lbs.

Controls and Settings

Access controls via the front panel. Settings include wash cycle selection, temperature adjustment, and load size.

Control Panel: Start/Stop button, cycle selector, temperature dial, load size selector.

Connecting Water Supply

Ensure proper connections to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Ensure hoses are securely attached to prevent leaks.
Check for kinks or blockages in the hoses.

Tip: Use Teflon tape on hose threads for a secure seal.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry: Do not overload the washer.
Select desired settings: Choose wash cycle, temperature, and load size.
Start the wash: Press the Start button to begin the cycle.
Monitor the cycle: Ensure the washer operates smoothly.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter regularly.
Check hoses for wear and tear.
Run a cleaning cycle monthly to prevent odors.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hose kinked or valve closed	Check hoses and ensure valves are open.
Unusual noise	Load imbalance	Redistribute laundry evenly.
Water leaks	Loose hose connections	Tighten hose connections.
Cycle not completing	Power interruption	Check for power supply issues.

Reset: Unplug for 5 minutes to reset the control board.