Kenmore 110-42826200 Washer Manual

The Kenmore 110-42826200 is a top-loading washing machine designed for efficient cleaning with various wash cycles and options. It features a large capacity drum, multiple water temperature settings, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, adjustable water levels, and a user-friendly control panel.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Cycles	Includes Normal, Delicate, Heavy Duty, and more
Adjustable Water Levels	Customize water usage based on load size
Control Panel	Easy-to-use interface for selecting cycles and options
Delay Start	Allows you to set a wash cycle to start later
End-of-Cycle Signal	Alerts you when the wash cycle is complete

Installation

Unpack the washer and inspect for any damage. Place it on a level surface near a water supply.

Connect the water supply hoses to the back of the washer.
Attach the drain hose to the appropriate outlet.
Plug the washer into a grounded electrical outlet.
Ensure all connections are secure before use.

WARNING! Ensure the washer is level to avoid vibrations during operation.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select your preferred language on the control panel.
Run a test cycle to ensure all functions are working properly.
Adjust settings for water temperature and wash cycle as needed.

CAUTION! Ensure the washer is empty during the test cycle.

Specifications

Model: Kenmore 110-42826200
Type: Top-loading washer
Capacity: 3.5 cubic feet
Water Temperature Settings: Hot, Warm, Cold
Wash Cycles: Normal, Delicate, Heavy Duty, Rinse & Spin
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access the control panel to select wash cycles, water temperature, and additional options.

Control Panel: Start/Stop button, cycle selector, water level adjustment, and delay start option.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies.

Turn off both water supply valves before connecting hoses.
Attach hoses securely to prevent leaks.
Turn on water supply and check for leaks.

Tip: Use plumber's tape on hose threads for a better seal.

Operating the Washer

Load clothes into the drum, select the desired cycle, and press start.

Open the lid and load laundry evenly.
Select the wash cycle and water temperature.
Press the Start button to begin the wash cycle.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not overload the washer to ensure proper cleaning.

Maintenance and Care

Regular maintenance will prolong the life of your washer.

Clean the lint filter after every use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to remove detergent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet; ensure door is closed.
No water filling	Water supply issue	Check water supply valves; ensure hoses are connected.
Excessive vibrations	Unbalanced load	Redistribute clothes evenly in the drum.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.

Service: For assistance, contact Kenmore customer service.