Kenmore 110-2973 series Washer Manual

The Kenmore 110-2973 series Washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Large Capacity Drum	Accommodates larger loads for efficiency
Durable Construction	Built to withstand frequent use
Easy-to-Use Controls	Intuitive interface for selecting settings

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Ensure proper drainage: Position drain hose securely in the standpipe.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your laundry.
Adjust settings: Set water temperature and spin speed as needed.
Load laundry: Do not overload the drum for optimal performance.

CAUTION! Ensure the washer is level to avoid vibrations.

Specifications

Model: Kenmore 110-2973
Type: Top-loading washer
Capacity: 3.5 cubic feet
Power Source: 120V AC
Water Usage: Adjustable based on load size
Dimensions: 27 inches wide x 42 inches high x 27 inches deep
Weight: Approximately 150 lbs

Controls and Settings

Access controls via the front panel. Features include cycle selector, temperature settings, and start/pause button.

Cycle Selector: Choose from various wash cycles.

Temperature Settings: Adjust for hot, warm, or cold washes.

Connecting Water Supply

Ensure proper connection to hot and cold water sources.

Turn off water supply before connecting hoses.
Match hoses to correct faucets (hot to hot, cold to cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on threads for a secure seal.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry and close the lid.
Select desired wash cycle and settings.
Press start to begin the wash cycle.
Monitor the cycle progress via the indicator lights.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and power cord.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Service: For further assistance, contact customer support.