Kenmore 110-2942 series Washer Manual

The Kenmore 110-2942 series washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable design to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a durable agitator.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Durable Agitator	Ensures thorough cleaning of clothes
End-of-Cycle Signal	Alerts when the wash cycle is complete
Lint Filter	Traps lint and debris during washing

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the back of the washer.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts.

Select wash cycle based on load type.
Adjust water level as needed.
Load clothes into the drum and close the lid.
Press the start button to begin washing.

CAUTION! Do not overload the washer for optimal performance.

Specifications

Model: Kenmore 110-2942
Type: Top-loading washer
Capacity: 3.2 cu. ft.
Power Source: 120V AC, 60Hz
Wash Cycles: Normal, Delicate, Heavy Duty, and more
Dimensions: 27" W x 42" H x 27" D
Weight: 150 lbs

Controls and Settings

Access controls via the front panel. Settings include wash cycle selection, water level adjustment, and start/pause functions.

Control Panel: Cycle selector, water level selector, start/pause button.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Attach hoses securely to prevent leaks.
Check for leaks after turning on water supply.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Follow the instructions for loading and selecting cycles.

Load clothes evenly in the drum.
Select desired wash cycle and options.
Press start to begin the wash cycle.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water in drum	Water supply issue	Ensure water supply is turned on.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Washer vibrating excessively	Unbalanced load	Redistribute clothes evenly in the drum.
Door won't unlock	Cycle not complete	Wait for cycle to finish before opening.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.