Kenmore 110-2913series410 Washer Manual

The Kenmore 110-2913series410 is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a durable stainless steel drum.

Feature	Description
Wash Cycles	Multiple settings for different fabric types and soil levels
Water Levels	Adjustable settings to conserve water based on load size
Spin Speed	High spin speed for effective water extraction
Stainless Steel Drum	Durable and resistant to chipping and rust
Control Panel	User-friendly interface for easy operation

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the washer and water supply.
Ensure drain hose is properly positioned to avoid leaks.
Plug into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle based on load type.
Adjust water level according to load size.
Press START to begin washing.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 110-2913series410.
Type: Top-loading washer.
Capacity: 3.5 cubic feet.
Power Source: 120V AC, 60Hz.
Dimensions: 27 inches (W) x 42 inches (H) x 27 inches (D).
Weight: Approximately 150 lbs.
Wash Cycles: Normal, Heavy Duty, Delicate, Quick Wash.

Controls and Settings

Access the control panel for wash cycle selection, water level adjustment, and start/stop functions.

Settings: Cycle selection, water temperature, spin speed, and delay start options.

Connecting Water Supply

Ensure proper connections to the hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to the correct inlet (hot/cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Follow the steps to load clothes and select the appropriate wash cycle.

Load clothes evenly in the drum.
Add detergent to the designated compartment.
Select wash cycle and press START.
Wait for the cycle to complete; the washer will automatically stop.

WARNING! Do not overload the washer to ensure proper cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Inspect hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Unusual noise	Foreign objects	Check drum for items causing noise.
Water leaking	Loose hoses	Tighten hose connections.

Service: For further assistance, contact customer support.