Kenmore 110-28133412 Washer Manual

The Kenmore 110-28133412 is a top-loading washing machine designed for efficient cleaning with various wash cycles and options. It features a large capacity drum, multiple water temperature settings, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, adjustable water levels, and a digital display.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Digital Display	Easy-to-read interface for cycle selection
Delay Start	Set a wash to start at a later time
End-of-Cycle Signal	Alerts when the wash cycle is complete

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to hot and cold water valves.
Connect drain hose: Ensure it is properly positioned to prevent leaks.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to avoid leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the control panel to choose the desired cycle.
Set water temperature: Adjust according to fabric care instructions.
Load laundry: Do not overload the drum for optimal cleaning.

CAUTION! Ensure the washer is level to prevent vibrations.

Specifications

Model: Kenmore 110-28133412
Type: Top-loading washer
Capacity: 3.5 cu. ft.
Water Temperature Settings: Hot, Warm, Cold
Spin Speed: Adjustable up to 800 RPM
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access wash settings via the digital control panel. Key controls include:

Cycle Selector: Choose the desired wash cycle.
Temperature Control: Adjust water temperature.
Start/Pause Button: Begin or pause the wash cycle.
End-of-Cycle Signal: Alerts when the wash is complete.

Connecting Water Supply

Ensure proper connections to prevent leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water valves.
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer:

Load laundry into the drum.
Select the desired wash cycle and options.
Press the Start button to begin the wash.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Service: For assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.