Kenmore 110-2686 Series Washer Manual

The Kenmore 110-2686 Series Washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Wash Cycles	Multiple settings for different fabric types and soil levels.
Water Level Adjustment	Customize water usage based on load size.
Durable Drum	Designed to handle heavy loads and resist wear.
Quiet Operation	Engineered for minimal noise during cycles.
Energy Efficient	Meets energy-saving standards for reduced utility bills.

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the washer and faucet.
Ensure drain hose is properly positioned in the drain.
Plug into a grounded electrical outlet.
Check for leaks before use.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Set the desired wash cycle and water level.
Load laundry into the drum without overloading.
Add detergent as per instructions.
Start the wash cycle by pressing the start button.

CAUTION! Do not overload the washer to avoid damage.

Specifications

Model: Kenmore 110-2686 Series.
Type: Top-loading washer.
Capacity: 3.5 cubic feet.
Wash Cycles: 12 different cycles available.
Water Efficiency: High efficiency with adjustable settings.
Power Source: 120V AC, 60Hz.
Dimensions: 27 inches wide, 42 inches high, 27 inches deep.

Controls and Settings

Access settings via the control panel. Features include cycle selection, water level adjustment, and start/pause buttons.

Control Panel: Easy-to-read display with intuitive buttons for cycle selection and adjustments.

Connecting Water Supply

Ensure proper connection to water supply for optimal performance.

Turn off water supply before connecting hoses.
Attach hoses securely to prevent leaks.
Check for any kinks in the hoses.

Tip: Regularly inspect hoses for wear and replace if necessary.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry and add detergent.
Select the appropriate wash cycle.
Press the start button to begin the wash.
Monitor the cycle and ensure proper operation.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures longevity and performance.

Clean the lint filter after each use.
Wipe down the exterior with a damp cloth.
Inspect hoses and connections regularly.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Inspect hoses for kinks and ensure water supply is on.
Unusual noise	Foreign objects	Check drum for foreign objects; remove if found.
Clothes not clean	Overloading	Reduce load size and ensure proper detergent use.

Service: For further assistance, contact 1-800-4-KENMORE or visit www.kenmore.com.