Kenmore 110-26132410 Washer Manual

The Kenmore 110-26132410 is a top-loading washing machine designed for efficient cleaning and convenience. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various laundry needs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Large Capacity Drum	Accommodates larger loads for fewer washes
Durable Construction	Built to withstand regular use
Easy-to-Use Controls	Simple interface for selecting wash settings

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply hoses to the back of the washer.
Plug into a grounded electrical outlet.
Ensure the drain hose is properly positioned.
Check for leaks before use.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Use the control panel to choose your desired cycle.
Set water temperature: Adjust according to fabric care instructions.
Load laundry: Do not overload the washer for optimal performance.
Start the wash: Press the start button to begin.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 110-26132410
Type: Top-loading washer
Capacity: 3.5 cubic feet
Wash Cycles: 12 different cycles
Water Temperature Settings: Hot, Warm, Cold
Power Source: 120V AC
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access wash settings via the control panel. Options include cycle selection, water temperature, and spin speed.

Control Panel: Start/Stop, Cycle Selector, Water Level, Temperature Control.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlets.
Check for leaks after connection.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry and close the lid.
Select the desired wash cycle and options.
Press the start button to begin washing.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odors.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Excessive vibration	Unlevel surface	Adjust feet to level the washer.
Water leaks	Loose connections	Tighten hose connections.

Service: For further assistance, contact Kenmore customer service.