Kenmore 110-26002012 Washer Manual

The Kenmore 110-26002012 is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Wash Cycles	Multiple settings for different fabric types and soil levels.
Water Level Adjustment	Customize water usage based on load size.
Durable Drum	Designed to handle heavy loads and resist wear.
Agitator	Ensures thorough cleaning of clothes.
Energy Efficient	Meets energy-saving standards for reduced utility costs.

Installation

Unpack and inspect the washer. Place on a level surface near water and electrical connections.

Connect water supply hoses to the washer and faucet.
Ensure drain hose is properly positioned.
Plug into a grounded electrical outlet.
Check for leaks before use.

WARNING! Ensure all connections are secure to prevent leaks and damage.

First-Time Setup

Power on the washer; follow on-screen prompts if available.

Set water temperature: Choose hot, warm, or cold based on load type.
Select wash cycle: Choose the appropriate cycle for your laundry.
Adjust water level: Set according to load size.
Start the wash: Press the start button to begin.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 110-26002012.
Type: Top-loading washer.
Capacity: 3.2 cubic feet.
Wash Cycles: Normal, Delicate, Heavy Duty, Quick Wash.
Water Efficiency: Adjustable water levels for optimal use.
Power Source: 120V, 60Hz.
Dimensions: 27 inches (W) x 44 inches (H) x 27 inches (D).

Controls and Settings

Access settings via the control panel. Key controls include start, stop, cycle selection, and water temperature adjustment.

Indicator Lights: Show status of wash cycle, water filling, and spin cycle.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot/cold connections on the washer.
Check for leaks after connections are made.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow the selected wash cycle instructions for optimal results.

Load clothes evenly in the drum.
Add detergent as per manufacturer’s instructions.
Select desired settings and start the wash.
Monitor the cycle through indicator lights.

WARNING! Do not overload the washer; it may cause damage.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Excessive vibration	Unlevel surface	Adjust feet to level the washer.
Water leaks	Loose connections	Tighten hose connections and check for damage.

Reset: Unplug for 5 minutes to reset the control board.

Service: Contact Kenmore support for assistance.