Kenmore 110-2586 series Washer Manual

The Kenmore 110-2586 series washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable design to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a durable stainless steel drum.

Feature	Description
Multiple wash cycles	Different settings for various fabric types and soil levels
Adjustable water levels	Customize water usage based on load size
Stainless steel drum	Durable and resistant to chipping and rust
Agitator	Effective cleaning action for thorough wash
Delay start	Set a timer for when to start the wash cycle

Installation

Unpack and inspect contents. Place on a stable surface near water and electrical connections.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust the feet to ensure the washer is stable.
Plug into electrical outlet: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts if available.

Select wash cycle: Choose the appropriate cycle for your load.
Set water temperature: Adjust based on fabric care instructions.
Load laundry: Do not overload to ensure effective washing.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 110-2586
Type: Top-loading washer
Capacity: 3.5 cu. ft.
Wash Cycles: 12 different cycles
Water Temperature Settings: Hot, Warm, Cold
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access controls via the front panel. Settings include wash cycle selection, water temperature, and spin speed.

Control Panel: Cycle selector knob, temperature dial, start/pause button.

Connecting Water Supply

Ensure proper connection to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to appropriate valves (hot to hot, cold to cold).
Check for leaks after turning on the water supply.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry and close the lid.
Select the desired wash cycle and options.
Press the start button to begin the wash cycle.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check outlet and circuit breaker.
No water filling	Hoses kinked or blocked	Inspect hoses and ensure water supply is on.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Washer leaking	Loose hoses	Tighten hose connections and check for damage.

Reset: Unplug for 5 minutes to reset the control board.