Kenmore 110-20372711 Washer Manual

The Kenmore 110-20372711 is a top-loading washing machine designed for efficient cleaning with various wash cycles and options. It features a large capacity drum, multiple water temperature settings, and a user-friendly control panel. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, adjustable water levels, and a user-friendly control panel.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient washing
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
User-Friendly Control Panel	Easy to navigate settings for all wash options
Delay Start Option	Set a delay for the wash cycle to start
End of Cycle Signal	Alerts when the wash cycle is complete

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water faucets.
Level the washer: Adjust the feet to ensure stability.
Plug into AC power: Ensure proper voltage and outlet type.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select wash cycle: Choose the appropriate cycle for your load.
Set water temperature: Adjust based on fabric care instructions.
Load the washer: Do not overload; leave space for clothes to move.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model Number: 110-20372711
Type: Top-loading washer
Capacity: 3.5 cubic feet
Wash Cycles: 12 different cycles
Water Temperature Settings: Hot, Warm, Cold
Power Source: 120V AC, 60Hz
Dimensions: 27 inches (W) x 42 inches (H) x 27 inches (D)

Controls and Settings

Access settings via the control panel. Options include wash cycle selection, water temperature, and spin speed.

Control Panel: Start/Stop button, cycle selector, temperature control, and spin speed options.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to correct faucets (hot to hot, cold to cold).
Check for leaks after connecting.

Tip: Use plumber's tape on hose threads for a secure fit.

Operating the Washer

Follow the steps for loading and starting the wash cycle.

Load clothes evenly in the drum.
Select the desired wash cycle and options.
Press the Start button to begin washing.
Monitor the cycle progress on the display.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Water leaking	Loose hoses	Tighten hose connections.

Reset: Unplug for 5 minutes to reset the control board.