Kenmore 110-20362810 Washer Manual

The Kenmore 110-20362810 is a top-loading washing machine designed for efficient cleaning and convenience. It features multiple wash cycles, adjustable water levels, and a durable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a large capacity drum.

Feature	Description
Multiple wash cycles	Different settings for various fabric types and soil levels
Adjustable water levels	Customize water usage based on load size
Large capacity drum	Accommodates larger loads for fewer washes
Durable construction	Built to withstand frequent use
Energy efficient	Designed to save water and electricity

Installation

Unpack and inspect contents. Place on a level surface.

Connect water supply: Attach hoses to hot and cold water valves.
Level the washer: Adjust feet to ensure stability.
Plug into AC power.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Set water temperature: Choose between hot, warm, and cold settings.
Select wash cycle: Choose the appropriate cycle for your load.
Adjust load size: Set the water level based on the size of your laundry.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 110-20362810
Type: Top-loading washer
Capacity: 3.5 cu. ft.
Wash Cycles: 12 different cycles
Water Levels: Adjustable settings
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access settings via the control panel. Features include cycle selection, temperature adjustment, and start/pause button.

Indicator Lights: Show the status of the wash cycle and any errors.

Connecting Water Supply

Ensure proper connections to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to the correct valves (hot to hot, cold to cold).
Check for leaks after connections are made.

Tip: Use plumber's tape to ensure a tight seal on connections.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry into the drum without overloading.
Add detergent to the designated compartment.
Select the desired wash cycle and options.
Press the start button to begin washing.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Incorrect cycle	Choose appropriate wash cycle for load.

Service: For further assistance, contact Kenmore customer service.