Kenmore 110-1421 Series Washer Manual

The Kenmore 110-1421 Series Washer is a top-loading washing machine designed for efficient and effective laundry care. It features multiple wash cycles, adjustable water levels, and a durable construction to handle various fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Top-loading design, multiple wash cycles, adjustable water levels, and a durable agitator.

Feature	Description
Multiple Wash Cycles	Options for different fabric types and soil levels
Adjustable Water Levels	Customize water usage based on load size
Durable Agitator	Efficiently cleans clothes while protecting fabrics
End-of-Cycle Signal	Alerts when the wash cycle is complete
Lint Filter	Catches lint and debris during washing

Installation

Unpack and inspect contents. Place the washer on a stable surface near a water supply.

Connect water supply hoses: Attach hoses to the hot and cold water faucets.
Level the washer: Adjust the feet to ensure the washer is level.
Plug into a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the instructions on the control panel.

Select wash cycle: Choose the appropriate cycle for your load.
Set water temperature: Adjust based on fabric care requirements.
Load clothes: Do not overload the washer for optimal cleaning.

CAUTION! Ensure the lid is closed before starting the wash cycle.

Specifications

Model: Kenmore 110-1421
Type: Top-loading washer
Capacity: 3.5 cu. ft.
Wash Cycles: 12 different cycles
Water Temperature Settings: Hot, Warm, Cold
Power Source: 120V AC, 60Hz
Dimensions: 27" W x 42" H x 27" D

Controls and Settings

Access controls via the front panel. Key buttons include Start, Stop, and Cycle Selector.

Cycle Selector: Choose from various wash cycles based on fabric type.

Water Level: Adjust to match load size for efficient washing.

Connecting Water Supply

Ensure proper connections to the hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to the corresponding water inlet on the washer.
Check for leaks after turning on the water supply.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Follow the steps to operate the washer effectively.

Load clothes into the drum.
Select the desired wash cycle and options.
Press Start to begin the wash cycle.
Wait for the cycle to complete; the washer will signal when done.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter after each use.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent odor.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and connected.
Clothes not clean	Overloading	Reduce load size for better cleaning.
Washer vibrating	Unlevel installation	Adjust feet to level the washer.

Service: For assistance, contact Kenmore customer service.