Kenmore 110-Series Washer Manual

The Kenmore 110-Series Washer is designed for efficient and effective laundry care. This manual provides essential information regarding safety, features, installation, operation, and troubleshooting. Below are key sections for your reference.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, adjustable water levels, and energy-efficient operation.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Cycles	Customizable settings for different fabric types
Adjustable Water Levels	Optimizes water usage based on load size
Energy Efficient	Designed to save water and electricity

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to hot and cold water valves.
Connect drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Set language: Choose preferred language in settings.
Adjust settings: Customize wash cycles and water levels.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Kenmore 110-Series.
Capacity: 3.5 cu. ft.
Wash Cycles: 12 different cycles available.
Water Efficiency: Uses 15% less water than standard models.
Power Source: 120V AC, 60Hz.
Dimensions: 27" W x 42" H x 28" D.

Controls and Settings

Access settings via the control panel. Options include wash cycle selection, water temperature, and spin speed.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Spin Speed.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off water supply before connecting hoses.
Match hoses to corresponding hot and cold water valves.
Check for leaks after connections are made.

Tip: Use Teflon tape on hose threads for a secure fit.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry: Do not overload the drum.
Select wash cycle: Choose appropriate cycle for fabric type.
Start the washer: Press the Start button to begin.

WARNING! Do not open the lid during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

Clean the lint filter regularly.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unlevel washer	Adjust the feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.

Service: For assistance, contact Kenmore customer service.